Bonjour
je veux installer pour la première fois phpcompta, j\'ai l\'erreur suivant ?
Impossible de se connecter à postgreSql !
Vos paramètres sont incorrectes :
base de donnée : account_repository
Domaine :
Port 5432
Utilisateur : phpcompta
Connection impossible : vérifiez vos paramètres de base de données
Merci pour toute aide
Impossible de se connecter à postgreSql !
Re:Impossible de se connecter à postgreSql !
Windows ou Linux ? Avec vous suivi le manuel et changer le fichier pg_hba.conf
@+
@+
Re:Impossible de se connecter à postgreSql !
Oui avec windows
Quel changement je doit faire pour le fichier pg_hba.conf ?
Quel changement je doit faire pour le fichier pg_hba.conf ?
Re:Impossible de se connecter à postgreSql !
POurrais-tu me montrer ton fichier svp ?
Re:Impossible de se connecter à postgreSql !
j\'ai installe postegresql8.3.
la chose que j\'ai pas bien compris sur la doc est ce qu\'on doit lancer l\'installation avec un compte Windows limite ? car dans ce cas ce compte n\'as pas le droit pour fonctionner easyphp ?
la chose que j\'ai pas bien compris sur la doc est ce qu\'on doit lancer l\'installation avec un compte Windows limite ? car dans ce cas ce compte n\'as pas le droit pour fonctionner easyphp ?
Re:Impossible de se connecter à postgreSql !
Je n\'emploie plus windows depuis au moins 10ans, je n\'en ai pas la moindre idée. De toute façon, le compte qui fait tourner le service postgresql et celui qui fait fonctionner easyphp ne sont pas obligatoirement les même
Re:Impossible de se connecter à postgreSql !
# PostgreSQL Client Authentication Configuration File
# ===================================================
#
# Refer to the \"Client Authentication\" section in the
# PostgreSQL documentation for a complete description
# of this file. A short synopsis follows.
#
# This file controls: which hosts are allowed to connect, how clients
# are authenticated, which PostgreSQL user names they can use, which
# databases they can access. Records take one of these forms:
#
# local DATABASE USER METHOD [OPTION]
# host DATABASE USER CIDR-ADDRESS METHOD [OPTION]
# hostssl DATABASE USER CIDR-ADDRESS METHOD [OPTION]
# hostnossl DATABASE USER CIDR-ADDRESS METHOD [OPTION]
#
# (The uppercase items must be replaced by actual values.)
#
# The first field is the connection type: \"local\" is a Unix-domain socket,
# \"host\" is either a plain or SSL-encrypted TCP/IP socket, \"hostssl\" is an
# SSL-encrypted TCP/IP socket, and \"hostnossl\" is a plain TCP/IP socket.
#
# DATABASE can be \"all\", \"sameuser\", \"samerole\", a database name, or
# a comma-separated list thereof.
#
# USER can be \"all\", a user name, a group name prefixed with \"+\", or
# a comma-separated list thereof. In both the DATABASE and USER fields
# you can also write a file name prefixed with \"@\" to include names from
# a separate file.
#
# CIDR-ADDRESS specifies the set of hosts the record matches.
# It is made up of an IP address and a CIDR mask that is an integer
# (between 0 and 32 (IPv4) or 128 (IPv6) inclusive) that specifies
# the number of significant bits in the mask. Alternatively, you can write
# an IP address and netmask in separate columns to specify the set of hosts.
#
# METHOD can be \"trust\", \"reject\", \"md5\", \"crypt\", \"password\", \"gss\", \"sspi\",
# \"krb5\", \"ident\", \"pam\" or \"ldap\". Note that \"password\" sends passwords
# in clear text; \"md5\" is preferred since it sends encrypted passwords.
#
# OPTION is the ident map or the name of the PAM service, depending on METHOD.
#
# Database and user names containing spaces, commas, quotes and other special
# characters must be quoted. Quoting one of the keywords \"all\", \"sameuser\" or
# \"samerole\" makes the name lose its special character, and just match a
# database or username with that name.
#
# This file is read on server startup and when the postmaster receives
# a SIGHUP signal. If you edit the file on a running system, you have
# to SIGHUP the postmaster for the changes to take effect. You can use
# \"pg_ctl reload\" to do that.
# Put your actual configuration here
# ----------------------------------
#
# If you want to allow non-local connections, you need to add more
# \"host\" records. In that case you will also need to make PostgreSQL listen
# on a non-local interface via the listen_addresses configuration parameter,
# or via the -i or -h command line switches.
#
# TYPE DATABASE USER CIDR-ADDRESS METHOD
# IPv4 local connections:
host all all 127.0.0.1/32 md5
# IPv6 local connections:
#host all all ::1/128 md5
# ===================================================
#
# Refer to the \"Client Authentication\" section in the
# PostgreSQL documentation for a complete description
# of this file. A short synopsis follows.
#
# This file controls: which hosts are allowed to connect, how clients
# are authenticated, which PostgreSQL user names they can use, which
# databases they can access. Records take one of these forms:
#
# local DATABASE USER METHOD [OPTION]
# host DATABASE USER CIDR-ADDRESS METHOD [OPTION]
# hostssl DATABASE USER CIDR-ADDRESS METHOD [OPTION]
# hostnossl DATABASE USER CIDR-ADDRESS METHOD [OPTION]
#
# (The uppercase items must be replaced by actual values.)
#
# The first field is the connection type: \"local\" is a Unix-domain socket,
# \"host\" is either a plain or SSL-encrypted TCP/IP socket, \"hostssl\" is an
# SSL-encrypted TCP/IP socket, and \"hostnossl\" is a plain TCP/IP socket.
#
# DATABASE can be \"all\", \"sameuser\", \"samerole\", a database name, or
# a comma-separated list thereof.
#
# USER can be \"all\", a user name, a group name prefixed with \"+\", or
# a comma-separated list thereof. In both the DATABASE and USER fields
# you can also write a file name prefixed with \"@\" to include names from
# a separate file.
#
# CIDR-ADDRESS specifies the set of hosts the record matches.
# It is made up of an IP address and a CIDR mask that is an integer
# (between 0 and 32 (IPv4) or 128 (IPv6) inclusive) that specifies
# the number of significant bits in the mask. Alternatively, you can write
# an IP address and netmask in separate columns to specify the set of hosts.
#
# METHOD can be \"trust\", \"reject\", \"md5\", \"crypt\", \"password\", \"gss\", \"sspi\",
# \"krb5\", \"ident\", \"pam\" or \"ldap\". Note that \"password\" sends passwords
# in clear text; \"md5\" is preferred since it sends encrypted passwords.
#
# OPTION is the ident map or the name of the PAM service, depending on METHOD.
#
# Database and user names containing spaces, commas, quotes and other special
# characters must be quoted. Quoting one of the keywords \"all\", \"sameuser\" or
# \"samerole\" makes the name lose its special character, and just match a
# database or username with that name.
#
# This file is read on server startup and when the postmaster receives
# a SIGHUP signal. If you edit the file on a running system, you have
# to SIGHUP the postmaster for the changes to take effect. You can use
# \"pg_ctl reload\" to do that.
# Put your actual configuration here
# ----------------------------------
#
# If you want to allow non-local connections, you need to add more
# \"host\" records. In that case you will also need to make PostgreSQL listen
# on a non-local interface via the listen_addresses configuration parameter,
# or via the -i or -h command line switches.
#
# TYPE DATABASE USER CIDR-ADDRESS METHOD
# IPv4 local connections:
host all all 127.0.0.1/32 md5
# IPv6 local connections:
#host all all ::1/128 md5
Re:Impossible de se connecter à postgreSql !
C\'est correct, as tu créé un utilisateur pour postgresql ???
Re:Impossible de se connecter à postgreSql !
oui
login : compta
mot de passe : php456
login : compta
mot de passe : php456
Re:Impossible de se connecter à postgreSql !
est ce que je doit supprimer le super utilisateur : postegre ?